DSC Labs


CamAlign F3-D – 3-D Alignment (16:9/4:3)

DSC’s major technological breakthrough over typical test charts is precision and increased dynamic range.  In addition do DSC’s patented grayscale and color elements, this chart provides many unique features specific to 3-D. DSC charts are designed to produce familiar electronic displays that are easily interpreted using standard waveform monitors and vectorscopes.  In production, a few frames shot on set provide invaluable information in post. DSC Labs believes you will find this chart invaluable in aligning your 3-D camera systems.

Mole Richardson


Mole Richardson introduced the Mole LED 12-Pack fixtures consists of 12 OSRAM KREIOS LED circuit boards.  Each of those 12 boards contain 20 high output LEDs, for a total of 240 individual sources. Unlike existing LED fixtures, the MoleLED blends these multiple sources into one, soft, single light source.  This single source approach renders the light more attractive to the talent and more familiar to the technicians.

12 pack features:

  • Available in 3200K or 5600K
  • 0.65 Amps is the maximum Draw at 110 volts A.C.
  • Universal 100-240 volts, 50/60Hz A.C. power supply
  • The fixture will operate on 12 volt car battery, 14.4 volt Anton Bauer/IDX V-Mount Battery, 24 volt camera battery or a 30 volt Battery Belt.
  • Local and remote dimming with built in DMX 512
  • Dimmable without color temperature shift

12 pack accessories:

Barn door, Gel frame, Battery mount bracket, 2-pin battery belt cable

The Single

The MoleLED Single puts the power and quality of light from the 12-Pack in the palm of your hand.  The Single is a go-anywhere, rig-anywhere lighting solution designed for use in interviews or on news desks; perfect for car rigs or as an Obie Light; and a great solution for lecterns or podiums. The Single will be packaged in kits of Tungsten or Daylight or a combination of both and powered remotely from the 6-Pack Controller. Unlike any other DC powered fixture today, The Single can be daisy-chained up to three in a row, and remain individually dimmed and switched from the controller.



Black Glimmer Digital Diffusion/FX:

A new addition to the Tiffen’s diffusion line, this filter cannot be reproduced by stacking any combination of diffusion filters.  Building upon the same advanced diffusion filter technology as with the Digital Diffusion/FX

  • Obtains enhanced beauty, while maintaining the richness of color and blacks
  • Maintains sharpness and softens detail in a unique manner
  • Brightens all skin tones
  • Adds a mild glow with a silky transition into highlights

Soft/FX Black Pro-Mist:

This combination maintains Soft/FX ½ throughout with a range of Black Pro-Mist densities. This filter produces an ethereal mood to your image.

  • Provides a wide range of diffusion – lower densities hide minor blemishes while higher densities can remove many years form a person’s age
  • Reveals more shadow detail
  • Produces a dreamy glow to your subjects with enhanced but controlled halation

Also in the booth were computers so attendees could explore the DFX software suite which allows the user to add filter effects in standalone mode or as a plug-in in Photoshop.  Also announced was Version 3.0 of its popular Tiffen Photo fx™ creative effects software, for Apple® iPhone® and iPod Touch® owners.  The new Tiffen Photo fx™ 3.0 software available on the Apple iTunes App Store, now features 67 filters organized into 9 different groups and 780 presets, including those filters sets previously available only as paid optional downloads. Adding these filters at no additional cost, plus new filters and effects, makes Photo fx 3.0 an even more incredible, feature rich app.



Zylight was please to demonstrate a prototype of their new “Active Diffusion” system. This variable diffusion density system allows you to dial down the amount of light passing through there patented filter up to 1/2 f-stop. Soon to include a DMX interface for external control the unit comes in three models, a 2×2 and 4×4 butterfly insert and a soft-box attachment for the Zylight IS3. (Thanks to iSquint.net for the video demonstration)

Zylight has also added several new Extender products to their line of camera accessories. The Extender X-110 measures 10.25” stowed and can extend to a length of 19.5” and only weights 6.1 oz. The Short Arm X-SA-100 is a single arm that is durable and even more lightweight than the original articulating arm.  The Mini X-M-100 enhances the DV and the consumer shooter arsenal by mounting to smaller cameras everyone can enjoy better lighting, audio and video mounting. It also works great for DLSR shooters by allowing them to attach a light or monitor to their rig.



Dedolight introduced it’s brand new 1200w daylight system which includes several new concepts that further improve performance, high efficiency convection cooling, rainproof construction, extremely low UV values, simple hinging open for easy serviceability and the unique optical system Dedolight is so well known for.  The 25lb ballast includes a selectable 120w or 800w output power, selectable 50/60Hz silent mode, 75Hz Flicker free mode, DMX control interface, hot restrike and an automated sensing 90-260v input voltage.  To top it all off the new Series 1200 light can be outfitted with a special 3-lens condenser module to adapt all other DP400 imager elements and project super sharp images.

New to the PanAura soft light line is the PanAura 7 Octodome. This 7’ giant is only 60cm deep and features several different lamping modules including 2x575w, 2x1000w, 4x1000w and each option capable of two different lamps, daylight or tungsten with no color variation.

For those of you that like the Dedolight 4 fixture backpacks (DBP) soft case light kits, there is a new 3 fixture backpack (DBPS) for smaller lighter loads.

The 400 series now features a wide angle lens attachment with barn door rotating on all access.  The focusing range translates into an unprecedented change of angle from 60 to 4 degree (DLWA) and the new wide angle lens attachment widens the angle to an additional 84 degrees (DLWAR400) with perfectly even light distribution, minimal light loss, all while maintaining focus.

Dedolight now offers a high tech dimmer to operate lights up to 1000w at 120v.  With this elegant in-line dimmer with integrated DMX control, we can not only control many of the Dedolight tungsten soft lights but also lights of other manufacturers.  Since these DMX controlled dimmer are noiseless, they can be mounted next to the lights or with an optional c-clamp.

The new Fillini Plus on camera lighting fixtures looks very similar to the original Fillini but provides more than three times the LED lighting intensity.  It no longer works with (4)AA internal batteries but instead the battery shoes hooks onto the back of the Fillini Plus in versions for Sony, Panasonic or Cannon mini DV batteries.  Additionally the fixture can be powered from the DC output of professional video cameras or Anton Bauer Gold Mount plates.  The LED’s output daylight color and the fixture includes a tungsten color correction flip down filter designed to withstand a heavy beating.



Nila is manufacturing some of the most technically advanced LED lighting fixtures in the television and film industry.  Just spending a few minutes looking over their product offering will convince you that they are among the best built and well thought out LED fixtures on the market today.  They are impressive.  From their 65 watt high light output and lens system to their modular “brick” configuration, they say quality.  The fixtures utilize a single-color, high brightness LED light source that boasts a 20,000 hour lamp life.  They are available in either “tungsten” or “daylight”.  The fixtures have quick change lenses that give 10, 25, 45 and 90 degree spreads.  An on-board dimmer with built-in backlit LCD display can control individually per fixture or be networked via DMX or their own Nila NET to control numerous fixtures from one controller with RJ-45 in and out.  Input power voltage can range from 90-240VAC, 50-60Hz via an auto-switching power pack.  The Model JNH is designed to attach to other same fixtures to create a larger multiple light source in a bank arrangement.  With a throw distance of over 100 feet, this bright source can accept a Chimera Light bank with an optional bracket.  This light does wonders on location with only a 65 watt power draw.  It can also be powered by an optional battery (juice) pack.  Other control devices include barn doors, gels and 2 types of eggcrates. They are also incredibly durable as you can see below.

For all you space light fans, Nila also makes it’s own version of this popular fixture style with LEDs.  It is configured as a LED “bank” of about 30” x 30”.  It has an 850 watt output and has similar control as the smaller 65 watt fixtures.  It comes with a 36” diameter x 36” high diffusion bag and a variety of targets options.

All Nila products are manufactured and assembled in the US.

Groupe Fokia

LTM is a part of the Groupe Fokia family.  LTM has a long history of manufacturing high quality lighting fixtures for the television and film industries.  From it’s popular “Pepper” line to it’s legendary HMI line of fixtures, LTM is well known throughout the world.  In keeping with that enviable tradition dating back to the early 1970s, they were showing their 18kW/12kW Cinepar HMI at NAB this year. This new fixture combines performance and sturdiness while being powered by either a magnetic or electronic w/pfc ballast that have been the hallmark of this France based company.   With there offices in Sun Valley, California and Paris, France, they are ready to provide support to their extensive distribution network.  Look for a new 24kW Cinepar and also pre-made Gel Tubes for fluorescents in the near future.

Balcar is also a part of the Groupe Fokia family of product lines.  Balcar was one of the early manufacturers of fluorescent lighting fixtures for use in television production.  This France based company has, over the decades, made substantial improvements to the design of their fixtures.  There fluorescent fixture line is known for their surprising high light output.  Their new “Super Lite” is no exception.  This new light weight fluorescent fixture was primarily designed for use on location.  It is solidly built to prevent twisting during transport, which protects the tubes.  They can be attached together to create a run of up to 75 feet all being powered by a single ballast unit, creating a “wall of light”.  The fixture has individual On/Off control for each tube at either 110v or 230v.   The Super Lite fixture uses a 55 watt T8 fluorescent tube that can also be fitted with T12, if desired.  There are also removable barn doors available for light control.  All in all this is a very nice addition to their already impressive line of fluorescent fixtures.



Most of us know Videssence as the innovator in fluorescent lighting for broadcast television applications.  Over the decades they have shown that they have what it takes to defend their marketplace which is now crowded with manufacturers that offer similar fluorescent based products.

Enter LED lighting….  LED lighting products abound at NAB this year.  The trend towards LED started close to 10 years ago.  It was often relegated to accent, set and location lighting for television.  It’s usefulness for lighting talent was always hampered by lack of output.  LED lighting fixtures just weren’t able to produce the lumens/footcandles needed for key, fill and back lighting.  Until now.  Videssence has entered the fray with the introduction of it’s new “ExceLED Series” line of LED lighting fixtures.  ExceLED’s most notable quality is, you guessed it, light output.  There are three fixtures in the series, 25 watt, 50 watt and 100 watt.  These fixtures have similar light output to 650 watt, 1,000 watt and 2,000 watt quartz fresnels respectively.  With that kind of output, you now have a viable alternative to quartz/tungsten halogen sources at ~1/20th of the power consumption and heat.  They will do wonders for your electric bill.

Other notable features include models for Non-Dim, On Board Dim, DMX Dim and Phase Dim.  They are 3,200K or with optional 5,600K color temperature.  Additional control can be achieved with use of gel frame and barn doors that are offered as accessories.

My guess is that these new ExceLED Series fixtures, made by Videssence, will have a significant impact on the use of LED for television studio lighting.  As in the past, Videssence continues to be an innovator in the field of TV broadcast lighting.



Sachtler is relaunching the new versions of the two classics in their medium duty video fluid heads, the Video 18 S1 and the Video 20 S1.  They both have a much wider payload range starting at 4 lbs. instead of 15 lbs., making them more suitable for DSLRs shooting HD video.  They feature two ranges of counterbalance using their Boost Button, with sixteen steps of adjustment.  The Video 18 S1 has a payload range of 4 – 40 lbs.  The Video 20 S1’s range is 4 – 55 lbs.

16 x 9


16 x 9, well known for its line of camera and lighting equipment and accessories, is now the sole distributor (available through Barbizon) of the LibertyPak range of range of portable battery power.  LibertyPak has been providing high quality lithium-ion battery belts, packs and efficient power management systems since 2002.  Introduced this year, were the Little Genny, and the Big Genny.  The Little Genny has a 320 Wh. Capacity with a max output of 600 watts.  It has 117V AC or 24V output to power just about anything you need in the field or in emergency situations.  The size is relatively compact, and the weight is 19 lbs.  The Big Genny is the larger version and has a 960 Wh capacity.  Charge time is 9 hrs. versus 3.5 hrs. for the smaller version.  Both are certified as IATA and DOT compliant, so you can fly with them!



New from Chimera this year is the yet to be released soft bank that fits over the Lite Panels 1 x 1 fixture.  It will fit over the front of the 1 x 1 with no hardware required using elastic material to secure it on the back of the fixture.  It will be available in different grades of diffusion.  When the final product is ready well post more info on the Barbizon website.



IDX brought out a new high output lithium-ion camera battery in the HL-9 Series.  It has an 88 Wh. Capacity and can run the newer HD cameras up to 3 hrs.  The new Power link feature allows you to piggyback  two batteries together, using the built in V-mount for a total of 176 Wh.  It also has a 5 – LED power status displays that shows remaining power in 20% increments.  The E-HL9 also supports Digi-View for reading battery status in most camera viewfinders.



Litepanels introduced a new series of Sola fresnels. The daylight-balanced Sola series offers beam control of 70° to 10° and single-shadow properties inherent in a Fresnel light, but with an LED light source, use just a fraction of the power of conventional fixtures.  Sola Fresnels are said to dim from 100% to 0 with no noticeable color shift, and the Sola ENG provides manual focus and dimming control via camera lens-style ergonomic controls.

The Sola6 and Sola12 provide on-fixture motorized control of focus and local dimming via a touch screen, and are also remote-controllable via their integrated DMX interface. Output is flicker free, remaining consistent even as the battery voltage goes down.

The Sola 6 draws only 75 watts, but is stated to produce a light output equivalent to a 650W tungsten unit, and weighs 6 lbs. (2.7kg).

The Sola 12 inherits the same efficiency drawing only 250 watts, but is also said to produce a light output equivalent to a 2000W tungsten and weighs only 14 lbs. (6.4kg).

The Sola ENG is only 4″ x 4″ x 5″ (102mm x 102mm x 127mm) and weighs just 10 ounces (.28kg). Employing a 3″ (7.62cm) lens, it draws 30 watts yet produces output equivalent to a 250W tungsten. The SolaENG runs on 10-20VDC sources such as camera batteries, or via an AC power adapter. It is designed for both on-camera and off-camera mounting.

Also new from Litepanels is MicroPro Hybrid light, the world’s first Continuous LED light combined with a “Flash” feature. This 9W fixture is the perfect complement for the motion-enabled DSLR cameras that are becoming increasingly popular. Use the “Continuous Mode” for the camera’s video capability and get beautiful wrap-around soft light. Or choose the “Flash” feature to produce a 400% brighter burst–just the ticket for a variety of still images.

Kino Flo


Kino Flo Introduced New Pole Operated VistaBeams, ParaBeams, ParaZips and Image fixtures. The new Pole-Op Mount lets you hang the KinoFlo lights from a pipe grid and adjust it from the floor. This is common in TV studios, and rare on film sets. The fixture includes a yoke with an attached junior pin. It’s also available with a Pole-Op option with two adjustments. The blue cup controls PAN (left or right) and the white cup controls the Tilt (Up and Down).

Kino also introduced the New KF32 Twin lamps for its Vista Beam and Vista Single line of cool lights. The new KF32 displays a smooth beam which responds especially well to the new generation of HD cameras.

California Sunbounce


Do you bounce?

California Sunbounce introduced the Sun Mover and the Wind Killer.

The SUN-MOVER is not another typical pop-up reflector but a flat collapsible light reflector that transforms SUN-LIGHT and STUDIO-LIGHT in a totally controlled way into SPOT-LIGHT and SOFT-LIGHT. Designed by a photographer for photographers, the SUN-MOVER™ truly is the greatest breakthrough in the history of photographic and film lighting via reflectors.

The WIND KILLER is a fabric that can be used on various sunbounce Mini, Pro & Big frames. It is stated that the Wind Killer eliminates 75% of wind which is excellent for steadycam operators.

Kata Bags


At this years NAB, Kata-Bag introduced a new Ultra-light weight backpack called “Bumblebee 222-UL”. This Ultra Light DSLR backpack features a combination of Lightweight technology, materials and Lightweight protection without compromises.

The Bumblebee 222-UL has additional storage space for 17″ laptops and other personal effects. When needed the lower compartment can be emptied of the padded dividers and pouches and the zippered partition between the two compartments can be opened to create one large storage space.

Also in the Kata area was the Pro-Light FlyBy-76 is a sleek, low profile on board* professional organizer designed to provide the best traveling, storage and working solutions.  Lightweight and Protective it will cater to the smallest detail of a professional’s working needs.

Specially formed foam encased spring steel Spine Guard for ultimate structural protection, TST reinforced corners, light yet durable RipStop fabrics & meshes, Aeriform foams, Honeycomb panels and Spider Webbing straps all join together to create an extremely protective but light case.  The modularity allows you to make it even lighter by simply removing components that are not necessary for your everyday work.

* Due to constantly changing airline regulations, please check with your carrier prior to departure.



Introduced this year was Manfrotto’s new 504 HD head which is a crossover between Photo and Video. This head features a four stop counterbalance with a continuous variable spring which allows you to set for different weight loads ranging from a Video camera or a DSLR camera on a rig. Also included is an easy to use adjustable Pan which not only controls the speed of your pan, but enhances the fluid motions over some previous models.



New from PAG was the snap on L95e battery.  It is a high-quality Li-Ion budget broadcast battery that can replace the Anton-Bauer Dionic 90 and it charges on Anton-Bauer Li-Ion chargers,  compatible with Anton-Bauer mounts.  It is 14.8V 6.5Ah 95Wh, with 7A maximum continuous output, 5 LED Run-Time, Capacity Indicator, Electronic protection system Circuit protected against damage,  Compact and lightweight and has no air transport restrictions with a 18 month warranty



ETC demonstrated their Selador line of 7 color led lighting fixtures on camera using the new Arri Alexa in a broadcast or film environment.  The Selador LED line emits bold colors, lush pastels, luminous whites. Seven discrete colors of LED allow for spectacular gel-like saturation for color washes or for flattering flesh tones–with astounding light output and energy-savings.  http://www.etcconnect.com/products.ledfixtures.aspx

ETC was also showing for the first time at NAB the new rigging Quick Touch controllers  from their line of motorized rigging Prodigy.    QuickTouch controllers all feature:  LCD display of position, load and error messages, load learning and load profiling, 3rd-position preset, Self-Test Safety Check at turn-on, annual inspection alert message, E-Stop Circuit, with optional multiple E-Stop locations and Optional handheld remote control.  http://www.etcrigging.com/products_quickTouch.html



Barco was showing their new RHDM Series High Definition reference monitors.   They are now available in both a 17” and 23” version.  These units have no fans are 16 x 9 native and have a much better compression ration.   Available in the B series supporting standard SD and HD-SDI signal with optional dual line and 3Gb/s HD-SDI and the P Series supporting dual link HD-SDI for post production use.

Color Kinetics


New from CK were the ColorBlaze TRX and ColorBlast TR units.   The ColorBlaze TRX has a throw of 60feet with an on board SD card where you can save shows.   It is ACN capable containing RGBAW leds.  The Color Blast TR has similar features with new color mixing through RGBAW leds.  The ColorBlast also has on board touch screen for control with preprogrammed functions.   Also new from CK is a line of accessories for the Color Reach from Tempest Lighting.  www.tempestlighting.com

Lowel Light


Lowel proudly introduced three new distinctive lighting systems, each designed with today’s professional imaging needs in mind. Blender mixes daylight & tungsten LED’s to quickly match the light quality of your location. SoftCore brings constant source, high C.R.I, fluorescent versatility to your soft box. And TRIO, a lightweight 3 lamp fluorescent fixture, let’s you take your studio on the road.

Lowel Blender is a quick, easy to use, LED fixture for location lighting. 2 sets of LED’s in Tungsten & Daylight color are quickly & easily blended. Perfectly match the mixed light sources of your real world location, or create a contrasting color blend to make your subject stand out.  The Blender can be powered by AC or battery for maximum flexibility.

Twin sets of 5000k Daylight and 3000k Tungsten LED’s, with rotary dimmer controls for each on the back of the fixture.  Blender packs more punch than you’ve come to expect from compact LED lights.  The lamphead’s compact size (4 x 3 x 3″) makes it small enough to fit on a pistol grip or compact light stand.  Powered by AC, Camcorder Battery Sleds, or conventional 12v connections.  Supplied with a set of front diffusers for variable softening & diffusing of the blended output.

Lowel SoftCore™, a compact light fixture that adds versatility and control to fluorescent softbox lighting setups. This multi-patented modular system uses the fluorescent lampheads of the Rifa eXchange System to light with up to 5 lamps, using most standard softboxes. The SoftCore folds down small for storage or travel.

Add there 80 Watt daylight fluorescent lamps for high output with accurate color. Its high frequency ballast is designed for flicker-free hi-res digital still, video, and slow-motion cinema use.

The Lowel Trio is for that small studio that you need to occasionally pack up & take on the road? Lowel’s new TRIOTM 3 lamp fluorescent fixture folds down slim, & carries easily. 

As comfortable in the studio as it is on location, TM delivers a beautiful soft source of high CRI daylight or tungsten color. Its 3 lamps are individually switched, to control light output. 

Designed with Lowel’s legendary attention to detail, TRIO’s mounting system keeps the light balanced over the stand while allowing a full range of tilting positions.



The new Focal Spot 200/400 gives joker bugs projection capability, at less than 10 inches in length and under 1.5lbs.  Includes 20 and 40 degree objective lenses, includes four blade cutter and m size gobo holder.  Attaches to Joker Bug with no additional parts, assembly or disassembly.

Also new from Joker the weatherproof 200/400 and 800 ballasts.  Weatherproof, fanless 200/400 auto-sensing weatherproof ballasts with input voltage range of 90-132 180-265 vac with automatic line voltage selection.  Amber power ready indicator, easy on/off push button.  Grounded US type 120vac power plug.

Porta Brace


Porta Brace introduced their new line of DSLR Camera Carrying Cases.  The cases are made of the 1000 denier cordura material, with the same handcrafted quality construction we are all used to.  They have plenty of pockets for accessories and cables and also include a suede shoulder strap.  The cases have the slip not dot anti skid bottom panel which is also water resistant.  Interiors include the bendable dividers and a combination of padded pouches and fleece microbead pillows for a custom protective interior.  The cases are available in the standard porta blue, black , adventure camo and also mossy oak camo.

Anton Bauer


Anton Bauer introduced the Dionic HCX at NAB.  Not only does the Dionice HCX have a  120 watt-hour capacity, they also have a  unique, built-in motion detection sensor. After a two-week period without a load, the DIONIC HCX automatically goes into “deep sleep,” significantly reducing self-discharge and allowing extended storage with nearly zero capacity loss. To “awaken” the battery for normal use, customers need only move the battery, thus activating the motion detection feature and as a result, “wake up” the battery. This new motion detection feature significantly increases the overall life of the battery by mitigating lithium-ion battery self-discharge when the battery is not in use. Anton/Bauer also has plans to integrate the DIONIC HCX with its signature Anton/Bauer Battery Management System (AB-BMS), which, in the future, will allow users to program the inactivity time length prior to the battery “going to sleep,” further allowing the customer to tailor their battery systems to their specific needs.

Weighing just 2.4 pounds (1.09 kg), the DIONIC HCX is capable of withstanding high instantaneous current draws in addition to 10 amp sustained current draws. The DIONIC HCX can power a 40 watt camera with a 20 watt light for over two hours – making it a good choice for users working with on-camera lighting applications requiring a high current draw.

In addition, the DIONIC HCX offers an enhanced LCD RealTime® fuel gauge. Users can now quickly and easily check their run-time, with the display showing up to nine hours of run-time when used under low-power load conditions. The new LCD display clearly indicates remaining run-time and battery capacity, showing the number of hours available with a seven segment display surrounded by arcs indicating 15 minute intervals. A battery “gas gauge” indicator also shows remaining capacity in 20 percent intervals underneath the remaining run-time indicators.