Celebrating 25 years Total Structures introduced their unique Halo system that allows operators of their 18” & 20.5” tower systems to provide fully engineered fall arrest provision to technicians needing to climb ground support towers or gain access to self-climbing ground support truss grids.
The Halo allows multiple vertical & horizontal fall arrest & wire rope ladder connection points at various locations along its structure to allow the operator to configure the most user friendly system possible depending upon the unique requirements of each system set-up. Connections points are made available on convenient industry standard 9” connection centers via pre-engineered fall-arrest “D-Bolt” anchors.
Using only five different components, Sky-net allows the user to add proprietary 10ft x 10ft nets to as many bays of the roof as required to provide fall arrest provision for technicians needing to access the system without the use of man-lifts or similar. With each installation being engineered alongside the main structural payload requirements of the roof the number of allowable technicians can be determined between operator & engineer in order to meet the requirements of each event.
From Total’s PointMan chain motor hoist line they introduced their Flex-Phase Electric Chain Hoists. Until now your choice of power supply was limited. Single or three phase operation with no opportunity to convert. However, now with Flex-Phase hoists by PintMan Lifting you no longer have to make that choice. These hoists are designed to be used on either single phase 115V or three phase 187V – 253V at 60hz. Switching from one to the other is as simple as disconnecting and reconnecting the power tail.