Rosco

We compiled Rosco’s new things, but then saw they produced a cool little video.  Check it out.

Rosco’s LED Channel Mount Kit allows designers to color and/or diffuse the light emitted from LED tape or ribbon and package it in an elegant and practical housing. The Kit consists of a 72″ long extruded aluminum housing, a clear plastic cover, three mounting clips and end caps – one of which is closed and the other contains a wire pass-through. Screws for the end caps are also included.

Rosco Bubble Fluid Bubbles are fun! Whether bringing joy and laughter to a party or creating an enchanting, effervescent atmosphere for any spectacular event, a room full of bubbles makes everyone smile. Rosco, the original innovator of safe, water based fog and smoke fluids, now brings that same attention to quality and safety to Bubble Fluid. Rosco Bubble Fluid is a premium, universal solution suitable for use in all bubble machines. This purpose engineered formula creates the maximum density of brightly iridescent bubbles that fly higher and float longer than other fluids. And most importantly, these bubbles remain dry and will not leave behind a slippery surface or harm sensitive electronics like lighting or sound desks. Available in gallons and 55 gallon drums.

The PF-1000 Remote Head Fogger is essentially a fog machine taken out of its box and reassembled to meet special design needs. It is designed for remote, precise applications where the use of a standard fog machine is not practical. The system consists of a Heat Exchanger Module that is separate from the Control Module and attached with tubing and a special cable. The Heat Exchanger Module is approximately 9 in. (22.9 cm) long and 3 in. (7.5 cm) in diameter. This small size allows it to be affixed in many places a standard fog machine could not be used, such as in props and animated mannequins. The Control Module can be mounted on a wall or placed anywhere remote to the Heat Exchanger Module and fluid reservoir.  It can also be modified to allow activation through a lighting control board or a main control computer. A 15 ft. Head Cable links the Heat Exchanger Module with the Control Module. This cable carries power and the data line for the thermal sensing device. A 15 ft long, 1/8 nylon tube carries fog fluid from the reservoir through the Control Module to the Heat Exchanger Module. The system uses all standard Rosco Fog Fluids.

The Delta 3000, Model 1600, Alpha 900 and the PF-1000 have been tested for use in professional theatrical productions and are included under the Equipment-Based Guidelines of the Equity-League Pension and Health Trust Funds.

Rosco Simple Spin™ Dual Gobo Rotator

A basic, double gobo rotator that is heavily laden with features for an affordable price.  On-board controls allow you to control the speed and direction of the gobos, or with flick of a switch, the Simple Spin can be controlled by plugging it into a dimmer.  The on-board, 100-240v power supply eliminates the transformer found on other similar rotators and allows it to be used all over the globe.  Combined with features like absolute silent rotation, Rosco’s unique Channel Lock that holds the rotator in place inside the iris slot, a threaded Teflon collar that allows for easy installation of thin steel & thick glass 86mm gobos and electronic controls & stepper motors that ensure the gobo rotates at speeds as fast as 24 RPM and as slow as 1/3 RPM without stalling.

Rosco REVO™ Dual Gobo Rotator

The Rosco REVO is designed to fit seamlessly into your existing lighting system.  The REVO operates using a standard 24v PSU, such as the Rosco Universal PSU’s or the PSU you may already be using for your color scrollers.  The rotator offers complete control over both motors, including: speed, direction and even 8 bit & 16 bit indexing on BOTH rotators, plus it’s got seven DMX control modes – allowing you to program your gobo rotator effects like you would other moving light equipment you’re already working with.  Combined with features like absolute silent rotation, Rosco’s unique Channel Lock that holds the rotator in place inside the iris slot, a threaded Teflon collar that allows for easy installation of thin steel & thick glass 86mm gobos and electronic controls & stepper motors that ensure the gobo rotates at speeds as fast as 24 RPM and as slow as 1/3 RPM without stalling.  The Rosco REVO is the perfect choice for theaters, tours and rep plots around the world.

Rosco RevoPRO™ Dual Gobo Rotator

The Rosco RevoPRO was designed for customers that need to have a programmed rotator, but don’t have the capability to run DMX on the job site.  With its on-board control system, the RevoPRO not only comes with 99 pre-programmed effects, but also the ability to program a specific effect using on-board controls, without a DMX console.  The RevoPRO can also be controlled via DMX and offers complete control over both motors, including: speed, direction and even 8 bit & 16 bit indexing on BOTH rotators, plus it’s got seven DMX control modes – allowing you to create expensive ‘moving-light’ rotation effects using an affordable gobo rotator.  Combined with features like absolute silent rotation, Rosco’s unique Channel Lock that holds the rotator in place inside the iris slot, a threaded Teflon collar that allows for easy installation of thin steel & thick glass 86mm gobos and electronic controls & stepper motors that ensure the gobo rotates at speeds as fast as 24 RPM and as slow as 1/3 RPM without stalling.  The Rosco RevoPRO is designed for customers looking to rotate gobos in themed & retail store environments or create lighting effects for special events.

http://rosco.com